13 Declar ation of Incor poration/Declar ation of Conf ormity
Declaration of Incorporation
pursuant to Machinery Directive 2006/42/EG
for a partly completed machine Appendix II Part B
Declaration of Conformity
pursuant to EMC Directive 2004/108/EC
GfA - Gesellschaft für Antriebstechnik
Dr.-Ing Hammann GmbH & Co KG
Wiesenstraße 81
40549 Düsseldor
We,
GfA – Gesellschaft für Antriebstechnik,
hereby declare that the product specified in the following complies with the above-mentioned
EU Directive and is only intended for installation in a door system.
TS 971
Applied standards
DIN EN 12453
DIN EN 12978
DIN EN 60335-1
DIN EN 61000-6-2
DIN EN 61000-6-3
Industrial, commercial and garage doors and gates
Safety devices for power operated doors and gates
Household and similar electrical appliances -
Safety – Part 1: General requirements
Electromagnetic compatibility (EMC) - Part 6-2
Generic standards - Immunity for industrial environments
Electromagnetic compatibility (EMC) - Part 6-3
Generic standards - Emission standard for residential, commercial and
light-industrial environments
We undertake to transmit, in response to a reasoned request by the authorities, the special
documents for this partly completed machine.
Authorised representative for the compilation of the technical documentation
(EU address in the company)
Dipl.-Ing. Bernd Synowsky
Documentation representative
Partly completed machinery according to EC Directive 2006/42/EC is only intended to be installed
in, or combined with, other machinery (or other partly completed machinery/systems) in order to
form a completed machine pursuant to the Directive. This product must therefore only be put into
operation when it has been determined that the complete machine/system in which it has been
installed complies with the provisions of the above-mentioned directives.
Düsseldorf, 05.12.2011
Stephan Kleine
Managing Director
Signature
To Previous Page
Loading...
