Maintenance cycle counter
Menu "8.5":
A value between 0 and 99,000, as a multiple of 1000, can be selected for the maintenance
cycle setting.
The maintenance cycle counter reading is reduced by one each time the Open final limit
position is reached.
Once the maintenance cycle reaches zero, the setting from menu “8.6” is activated.
Short-circuit/overload display
If there is a short circuit or an overload of the 24 VDC supply voltage, the 7-digit display
vanishes.
Display for active "WSD" wireless safety device
If the "WSD" wireless safety device is active, a red point is displayed on the right-hand digit
display.
To Next Page
Loading...
