GFI FaxMaker - Page 55

GFI FaxMaker Appendix 2: Microsoft Exchange 2007/2010 Connector | 49
Remove-ForeignConnector -identity "GFIFaxmaker"
GFI FaxMaker installed on a separate machine
From the Microsoft Exchange Management Shell, run the following commands:
NOTE: If a custom name was given when creating the connector manually, replace
GFIFaxMaker with the name of the connector.
1. Remove Receive Connector:
Remove-ReceiveConnector "GFIFaxMaker"
2. Remove Send Connector:
Remove-SendConnector "GFIFaxMaker"