Gibertini E50S/3 - 6.3.4 Print functions

Semi-micro balance Mod. E50S/3
Page 13 of 38
Procedure for changing the weight unit:
Display
Key
Step
- - - - - - - -
UNIT
-
1
9
«»
Press repeatedly, until “UNIT-1” is displayed.
- - - - - - - -
UNIT
-
1
9
«»
The unit now flashes.
- - - - - - - -
UNIT
-
1
LB
«»
Press repeatedly, until the unit you require appears.
- - - - - - - -
UNIT
-
1 LB
«»
To confirm the choice of unit.
Press «esc» to exit the menu.
6.3.4 Print functions
 SET
DATA PRINT
AUTOSTART ON/OFF Start print automatically on switching on/off
MODE UNSTABLE Individual print, each value
STABLE Individual print, stable value
LOADCHANGE Print after load changes
CONTINOUS Continuous print after every integration time
TIMEBASE Continous print with time basis
TIMEBASE 2.0 Time basis (in seconds) freely selectable
SET PRINTFORMAT DATE AND TIME ON/OFF
BALANCE-ID ON/OFF
PRODUCT-ID ON/OFF
GROSS AND TARE ON/OFF
UNITS ON/OFF
USER ON/OFF
PRODUCT ttt...
PRODUCTMODE HOLD
DELETE
COUNT
“SET PRINTFORMAT”
Elements which are switched on are printed in each case.
“UNITS”
All currently active units are printed out.
“PRODUCT ttt....“
The product name can be entered alpha-numerically.
“PRODUKTMODE”
“HOLD”.: The product name is stored.
“DELETE”: The product name is deleted after each expression.
“COUNT”: A counter, which is incremented by 1 after each expression is printed.
When a peripheral device (for example a printer) is connected, the balance interface must be configured in
the sub-menu “SET INTERFACE”. (see chapter 6.3.7 "Interface functions").