Need help?Do you have a question about the GigaDevice Semiconductor GD-Link V2 and is the answer not in the manual?
Details GD-Link V2 pin functions and connection diagrams for SWD, JTAG, and serial interfaces.
Describes the physical button, LEDs, and buzzer on the GD-Link V2 for status indication.
Step-by-step guide to updating the GD-Link V2 firmware using the GD-Link Programmer software.
Covers various methods for programming target microcontrollers using the GD-Link V2.
Instructions for programming target chips using KEIL, IAR, and Eclipse IDEs.
Guide on using the GD-Link Programmer software for target chip programming.
Details configuring and performing offline programming without active PC connection.
Describes initiating the programming process using external signal pins.
Explains programming by copying files to the virtual USB mass storage device.
Overview of the debugging functionalities offered by the GD-Link V2.
Procedures for debugging using SWD/JTAG interfaces with common IDEs.
Configuration and usage of the Serial Wire Output (SWO) for debugging information.
How to use the virtual serial port for device output and debugging messages.
General| Brand | GigaDevice Semiconductor |
|---|---|
| Model | GD-Link V2 |
| Category | Adapter |
| Language | English |
To Next Page