GILBARCO VEEDER-ROOT Latitude LS-100 User Manual

Latitude Pump/Dispenser Maintenance Inspecting Pump/Dispenser Periodically Page 7-4 MDE-5422B Latitude™ Owner’s Manual · March 2021
Once a week or if a customer complaint arises
Hose retrievers 1 Inspect hose retrievers for frayed or broken cables.
2 Inspect hose retrievers for cables wrapped around hoses.
Notes: 1) If repair is required, call an ASC/CSC to make the repairs.
2) When hose retrievers are used, the breakaway whip hose must be attached to t
he
nozzle, and the breakaway coupling attached to the whip hose, with the retriever clamp positioned between the breakaway coupling and the dispenser outlet casting. When retrievers are not used, the breakaway whip hose is attached to the dispenser outlet casting and the breakaway coupling is attached to the other end of the breakaway whip hose.
Do not attempt to make these repairs yourself. Doing so could result in severe injury or death.
WARNING
!
• Owner-inspect • ASC/CSC only-repair and test
Once a week or as notified a
bout a potential problem
Nozzles and boot area 1 Inspect nozzles for the following:
• Damage • Leaks • Loose nozzle spouts • Missing parts, such as retainer spr
ings and splash guards
If you find a leak, stop using the pump/dispenser, and contact your local ASC/CSC. Fire, explosion, or electrical shock could result, if you continue to use a damaged pump/dispenser.
WARNING
!
2 Inspect vapor recovery boots (bellows) for proper seal and signs of damage.
3 Consult the nozzle manufacturer for
any additional required inspections.
Note: If repair is required, call an ASC/CSC to make the repairs.
Do not attempt to make these repairs yourself. Doing so could result in severe injury or death.
WARNING
!
• Owner-inspect • ASC/CSC only-repair and test
Recommended Frequency Components Recommended Maintenance Who Perform
s the Inspection/Repair

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Latitude LS-100
Category	Petrol Station Equipment
Language	English