EasyManuals Logo

GILBARCO VEEDER-ROOT Latitude LS-100 User Manual

GILBARCO VEEDER-ROOT Latitude LS-100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Page 2-2 MDE-5422B Latitude™ Owner’s Manual · March 2021
Important Safety Information
No Open Fire
Open flames from matches, lighters, welding torches or
other sources can ignite f
uels and their vapors.
No Sparks - No Smoking
Sparks from starting vehicles, starting or using power tools,
burning cigarettes, cigars or pipes can also ignite fuels and their
vapors. Static electricity, including an electrostatic charge on
your body, can cause a spark sufficient to ignite fuel vapors.
Every time you get out of a vehicle, touch the metal of your
vehicle, to discharge any electrostatic charge before you
approach the dispenser island.
Working Alone
It is highly recommended that someone who is capable of
rendering first aid be present during servicing. Familiarize
yourself with Cardiopulmonary Resuscitation (CPR) methods, if
you work with or around high voltages. This information is
available from the American Red Cross. Always advise the
station personnel about where you will be working, and caution
them not to activate power while you are working on the
equipment. Use the Lockout/Tagout procedures. If you are not
familiar with this requirement, refer to this information in the
service manual.
Working With Electricity Safely
Ensure that you use safe and established practices in working
with electrical devices. Poorly wired devices may cause a fire,
explosion or electrical shock. Ensure that grounding
connections are properly made. Take care that sealing devices
and compounds are in place. Ensure that you do not pinch wires
when replacing covers. Follow Lockout/Tagout requirements.
Station employees and service contractors need to understand
and comply with this program completely to ensure safety while
the equipment is down.
Hazardous Materials
Some materials present inside electronic enclosures may
present a health hazard if not handled correctly. Ensure that you
clean hands after handling equipment. Do not place any
equipment in the mouth.
Gilbarco Veeder-Root encourages the recycling of
our products. Some products contain electronics,
batteries, or other materials that may require special
management practices depending on your location.
Please refer to your local, state, or country
regulations for these requirements.
In an Emergency
Inform Emergency Personnel
Compile the following information and inform emergency
personnel:
Location of accident (for example, addres
s, front/back of
building, and so on)
Nature of accident (for example, poss
ible heart attack, run
over by car, burns, and so on)
Age of victim (for example, baby
, teenager, middle-age,
elderly)
Whether or not victim has received first aid (for example,
s
topped bleeding by pressure, and so on)
Whether or not a victim has vomited (for example, if
sw
allowed or inhaled something, and so on)
Gasoline ingested may cause unconsciousness
and burns to internal organs. Do not induce
vomiting. Keep airway open.
Oxygen may be needed at scene. Seek medical
advice immediately.
WARNING
!
Gasoline inhaled may cause unconsciousness
and burns to lips, mouth and lungs.
Keep airway open.
Seek medical advice immediately.
WARNING
!
Gasoline spilled in eyes may cause burns to eye
tissue.
Irrigate eyes with water for approximately
15 minutes.
Seek medical advice immediately.
WARNING
!
Gasoline spilled on skin may cause burns.
Wash area thoroughly with clear water.
Seek medical advice immediately.
WARNING
!
IMPORTANT: Use of non-Gilbarco replacement parts, defects
caused by the unauthorized addition
of non-Gilbarco items to
Gilbarco equipment or by the unauthorized alteration of
Gilbarco equipment voids this warranty.
IMPORTANT: Ox
ygen may be needed at scene if gasoline has
been ingested or inhaled. Seek medical advice immediately.
Lockout/Tagout
Lockout/Tagout covers servicing and maintenance of machines
and equipment in which the unexpected energization or start-up
of the machine(s) or equipment or release of stored energy
could cause injury to employees or personnel. Lockout/Tagout
applies to all mechanical, hydraulic, chemical, or other energy,
but does not cover electrical hazards.

Table of Contents

Other manuals for GILBARCO VEEDER-ROOT Latitude LS-100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GILBARCO VEEDER-ROOT Latitude LS-100 and is the answer not in the manual?

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General IconGeneral
BrandGILBARCO VEEDER-ROOT
ModelLatitude LS-100
CategoryPetrol Station Equipment
LanguageEnglish

Related product manuals