GILBARCO VEEDER-ROOT Passport MDE-5412 User Manual

MDE-5412C Passport® EDGE Installation and Start-up Manual · February 2019 Page 1
MDE-5412C
Passport
®
EDGE Installation and Start-up Manual
February 2019
Introduction
Purpose
This manual provides instructions for:
• The importance of “Why a site survey is needed prior to installing the Passport
®
Edge and
Secure Zone Router (SZR)”
• How to properly install the Passport Edge Hardware with the
SZR
•
How to configure the Passport Edge to supp
ort communication between Passport Edge
server and clients, PIN pads, dispensers, Applause
™
Media System, and other site LAN
de
vices
Gilbarco
®
Veeder-Root
®
introduces the Passport EDGE. The Passport Edge introduces new
Passport Server (PS65) and Passport Client (Tablet) Hardware. The Passport Edge requires the
installation of the SZR as the connection point for site LAN devices (see Figure 1).
Figure 1: Passport EDGE Connection Point

GILBARCO VEEDER-ROOT Passport MDE-5412 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Passport MDE-5412
Category	Wireless Router
Language	English

Summary

Introduction

Purpose

Describes the scope and objectives of the manual.

Intended Audience

Required Tools and Materials

Related Documents

Abbreviations and Acronyms

Performing a Site Survey

IMPORTANT INFORMATION

Critical notes regarding firewall and ISP settings during site survey.

Passport EDGE Hardware Setup

Secure Zone Router

Details and setup instructions for the Secure Zone Router (SZR).

SZR Network Configuration Templates

Lists various port configuration templates for the SZR.

Passport Edge Server (PS65)

Information and setup instructions for the PS65 server hardware.

Mounting PS65

Instructions for the physical mounting of the PS65 unit.

Passport EDGE using the EDH2

Setup and usage instructions for the Enhanced Dispenser Hub 2 (EDH2).

Passport Client (Tablet)

Instructions for connecting and setting up the Passport Edge tablets.

VeriFone® MX915 PIN Pad

MX915 PIN Pad Network Templates

Lists network configuration templates for the MX915 PIN Pad.

IP Based Receipt Printer

Receipt Printer Network Templates

Lists network configuration templates for the receipt printer.

Passport Customer Display

Customer Display Network Templates

Lists network configuration templates for the customer display.

Xenon™™ 1900 Scanner

Passport Report Printer

Passport Edge Software Setup

Introduction to the Passport Edge Software

Overview of the software installation process.

Installing Software on Passport Edge Server (PS65)

Detailed steps for installing software on the PS65 server.

Passport EDGE EDH2

Passport Client (Tablet)

Configuring the Tablet

Step-by-step guide for tablet setup and configuration.

Configuring the Passport Edge Server

VeriFone MX915 PIN Pad

Passport Edge Installation

Performing Installation Checks

Checklist of tasks to complete before starting the installation.

Appendix A: Epson TM-M30 Programming

Appendix B: GDS Programming

Configuring GDS

Detailed steps for configuring the Gilbarco Deployment Service (GDS).

Appendix C: Registering the Store with Insite360

Appendix D: Customer Tablet Programming

Appendix E: Moving a Snapshot Backup from the PX52/PX60 System

Restoring Data on the PS65 Passport System

Steps to restore data onto the PS65 Passport System.

Appendix F: Converting Site from a Non-Gilbarco POS to a Passport Edge POS