17
Installation
FSH−2−PH
2.05.3 Remote Manual Activation Station − continued
The conduit hinge secon of this configuraon will allow the hood & fryer to be moved straight out from
the wall for cleaning and service, without need to disconnect the manual pull system, risking an
accidental system discharge, or need to disrupt other appliances in the cook line.
Extend the assembly conduit hinge, then route wire cable through the conduit and connect to hood’s
manual pull cable. Ensure all connecons are ght.
Hinge secon
Connecon to hood
Carefully slide hood into the proper positon in the cook
line so that it is ready to have the fryer installed.
Be advised that this configuraon is only one of several
which can be ulized for Ansul Manual Pull Staon
installaons. Ansul technicians are well experienced in
determining the best configuraon for specific
situaons.
To Next Page
Loading...
