Glow-worm ENERGY - Installing the 60;100 mm diameter horizontal wall;roof duct

5 Set-up
10 Installation manual 0020237648_03
105
A
Note
View shows article number 0010031041
Clearance Article number
0010035513 0020219523
0010031041
A 87 mm 140 mm
The mounting template indicates the position for horizontal
installation of the air/flue pipe when connecting it to the up-
per side of the boiler.
Condition: Top connection, air/flue pipe to the side
A
A = 125 mm
If you want to install the air/flue pipe laterally, you can de-
termine the position of the wall duct by carefully offsetting the
central line of the wall duct that is marked on the mounting
template.
▶ Calculate the required gradient in accordance with the
length of the flue pipework and then mark the position for
the wall duct.
5.1.1.2 Determining the clearance to the external
wall
AC
A
B
C
1.
2.
1. Upper flue pipe at the
rear
2. Upper flue pipe to the
side
A Clearance to the ex-
ternal wall
B Clearance to the in-
ternal wall: 105 mm
▶ Measure the clearance (A) from outside of the wall to the
centre of the connector.
Clearance Article number
0010035513 0020219523
0010031041
C 87 mm 140 mm
5.1.2 Installing the 60/100 mm diameter horizontal
wall/roof duct, article number 0020219523 or
0010035513
5.1.2.1 Scope of delivery, article number
0020219523
832
Ø167
40
85
60
1
234
6 5
1 Wall collar, 100 dia-
meter (2 pcs)
2 Horizontal wall/roof duct
3 40 mm clamp
4 87° elbow
5 Screws (8 x)
6 Seal