Glow-worm ENERGY - Assembling the vertical roof duct

Set-up 5
0020237648_03 Installation manual 23
5.1.11.4 Installing extensions
1
2
3
1. Fit the extension onto the connection piece.
2. If you do not insert a sliding sleeve, install the air clamp
directly onto the product.
3. Install the required extensions as far as the roof duct.
– Install the last extension only once the roof duct has
been positioned.
4. Connect all of the pipe joints with air pipe clamps.
(→ Page 37)
5.1.11.5 Assembling the vertical roof duct
Note
In its as-delivered condition, the lower pipe of the
vertical roof duct is pushed into the upper pipe.
B
A
C
4x
▶ Assemble the vertical roof duct.
– Ensure that you hear the lower part click into place in
the upper part.
5.1.11.6 Scope of delivery article number
0020230604 (black, with collar)
(1463)
926 550
48
1
2
3
4
1 Vertical roof duct
2 Fixing bracket
3 48 mm air-pipe collar
4 Cover plate