Glow-worm ENERGY - CE Certification; Regulations (Directives, Laws, Standards)

Safety 1
0020237648_03 Installation manual 5
1.3.9 Product damage caused by adjacent
channel vents
1 m
1 m
3 m
H › 0
Extremely damp extract air escapes from the
channel vents. This may condense in the air
pipe and cause damage to the product.
▶ Observe the requirements for minimum
clearances in accordance with the figure.
1.3.10 Requirements for the air/flue
terminal
As a result of improper installation, water may
penetrate the building and cause material
damage.
▶ Observe the requirements for the air/flue
terminal in the boiler's installation instruc-
tions.
1.4 CE certification
The heat generators are certified as gas-fired
boilers with associated flue systems in ac-
cordance with the Gas Appliances Regulation
(EU) 2016/426. This set-up instructions are a
component of the certification and are cited
in the type testing certificate. In compliance
with the regulatory statutes of these set-up
instructions, the proof of usability of the ele-
ments identified by Glow-worm article num-
bers that are designed for the air/flue pipe
is provided. If you do not use certified ele-
ments for the Glow-worm air/flue pipe when
installing the heat generators, this voids the
CE conformity of the heat generator. We
therefore strongly recommend that you in-
stall Glow-worm air/flue systems.
1.5 Regulations (directives, laws,
standards)
▶ Observe the national regulations, stand-
ards, directives, ordinances and laws.