Glow-worm ENERGY - Installing the End Pipe

Set-up 5
0020237648_03 Installation manual 21
100
80-100
2. Secure the extensions to the wall using the pipe
clamps.
– Use one pipe clamp for each extension directly be-
side the sleeve.
– Upstream of each elbow, install another pipe clamp
on the extension.
43
10
13
3. Drill the fastening holes away from the centre.
5.1.10.7 Installing the end pipe
1. Install the second 87° elbow into the last extension.
2. Securely insert the end pipe into the 87° elbow until the
end pipe clicks into place in the seal.