Glow-worm ENERGY - Black Terminal Set; Installing the Black Terminal

Set-up 5
0020237648_03 Installation manual 15
5.1.8 Black terminal set – article number
0020219538
5.1.8.1 Scope of delivery
Note
Not valid for article number 0010035513
321
1 Wall collar
2 Terminal piece
3 End pipe
5.1.8.2 Installing the black terminal (change of
colour)
Note
You must install the terminal sets before installing
the flue pipework.
Condition: Terminal secured using screws
▶ Undo the lateral screws.
A
B
1. Detach the terminal with the flue pipe by pushing the air
pipe to the floor.
Note
You cannot reuse the terminal as detaching
the terminal damages the latching lugs in the
terminal.
2. Pull the terminal from the air pipe together with the flue
pipe.
A
B
3. Release the catch between the opening piece and the
end pipe.
4. Pull the end pipe from the opening piece.
5. Release the catch between the opening piece and the
flue pipe.
6. Pull the opening piece from the flue pipe.