GME CP30 - Page 70

CP30 INSTRUCTION MANUAL
66
RXFREQ:
• On receive-only channels - allows you to edit the receive frequency.
• On CB and private channels - allows you to view the receive frequency
(you cannot edit the frequency of a CB or private channel)
TXFREQ:
• On receive-only channels - displays N/A since there is no TX
frequency.
• On CB and private channels - allows you to view the transmitter
frequency (you cannot edit the frequency of a CB or private channel).
RXTONE:
• On CB and receive-only channels - displays GLOBAL to indicate the
the main menu’s CTCSS tone settings apply to all receive channels, or
if the channel is not in Silent memory displays CTCSOF to indicate the
channel does not use a subtone.
• On private channels - displays CTCSxx/DCSxxx to indicate that
CTCSS/DCS tone in use, or CTCSOF to indicate the channel does not
use a subtone.
TXTONE:
• On receive-only channels - displays N/A to indicate that transmit
CTCSS tones do not apply.
• On private channels - displays CTCSxx/DCSxxx to indicate the CTCSS/
DCS tone in use, or CTCSOF to indicate the channel does not use a
subtone.
• On CB channels - displays GLOBAL to indicate that the main menu’s
CTCSS tone settings apply to all receive channels, or if the channel is
not in Silent memory displays CTCSOF to indicate the channel does
not use a subtone.
TXPWR:
• On receive-only channels - displays N/A since there are no
transmissions.
• On CB and private channels - allows you to view the transmitter power
setting.
BSYLK:
• On receive-only channels - displays OFF since there are no
transmissions on the channel.