GME CP30 - Page 75

71
CP30 INSTRUCTION MANUAL
Viewing the Name of a CB or Private Channel
While in the CHAN sub-menu:
1. Rotate the Channel Selector knob or press the keys to cycle
through the sub-menu until NAME is displayed.
2. Press
MENU
F
. The name assigned to the selected CB channel is
displayed.
3. Press
MENU
F
to exit the menu.
Removing a Receive-only Channel
IMPORTANT: Before continuing, check that the correct receive-only channel
number is displayed to ensure you do not remove the wrong channel.
While in the CHAN sub-menu:
1. Rotate the Channel Selector knob or press the keys to cycle
through the sub-menu until REMOVE is displayed.
2. Press
MENU
F
. DEL? is displayed.
i. To cancel without removing the channel, press
MENU
F
. The radio
will exit the menu.
ii. To continue removing the channel, hold
MENU
F
. The channel
number will ash then disappear as it is removed. The radio will
the return to the CHAN sub-menu.
Viewing the Channel Type
While in the CHAN sub-menu:
1. Rotate the Channel Selector knob or press the keys to cycle
through the sub-menu until TYPE is displayed.
2. Press
MENU
F
. The selected channel ‘Type’ is displayed.
i. If the channel is a CB channel CB is displayed.
ii. If the channel is a Receive-only channel RXONLY is displayed.
iii. If the channel is a Private channel PRIVATE is displayed.
3. Press
MENU
F
to exit the menu.