GME CP30 - Page 76

CP30 INSTRUCTION MANUAL
72
Viewing the Transmit Frequency
1. If the channel is a Private channel and no tone is enabled, CTSCOF
is displayed. Otherwise the CTCSS/DCS tone the channel is using is
displayed as CTCSxx or DCSxxx.
2. Press
MENU
F
to exit the menu.
Viewing the Transmitter Power Setting
While in the CHAN sub-menu:
1. Rotate the Channel Selector knob or press the keys to cycle
through the sub-menu until TXPWR is displayed.
2. Press
MENU
F
.
i. If the channel is a CB or Private channel, the transmitter power
setting for the selected channel is displayed as 5W, 1W or
100MW.
ii. If the channel is a Receive-only channel N/A is displayed.
3. Press
MENU
F
to exit the menu.
Viewing the Busy Lockout Setting
While in the CHAN sub-menu:
1. Rotate the Channel Selector knob or press the keys to cycle
through the sub-menu until BSYLK is displayed.
2. Press
MENU
F
.
i. If the channel is a CB channel, GLOBAL is displayed to indicate it
is following the Busy Lockout setting in the main menu.
ii. If the channel is a Private channel, ON, OFF or GLOBAL is
displayed to indicate whether Busy Lockout is enabled or is
congured to follow the user congurable global setting.
iii. If the channel is a Receive-only channel, OFF is displayed since
the radio is unable to transmit on a Receive-only channel.
3. Press
MENU
F
to exit the menu.