Goodwe BT Series User Manual

23
03 MANUAL OPERATION User Manual V1.3-2021-12-15
2
3
Device information
Firmwareversion
MACaddress
WirelessAPmode
SSID
IPaddress
WirelessSTAmode
RouterSSID
Encryptionmethod
Encryptionalgorithm
RouterPassword
1.6.9.3.38.2.1.38
60:C5:A8:60:33:E1
Enable
Solar-Wi-Fi
10.10.100.253
Disable
WiFi_Bum-in
WAP/WAP2-PSK
AES
WiFi_Bum-in
No router, weak Wi-Fi signal, or the password is not correct
Help: The wizard will help you to complete setup
within one minute.
StartSetup
Please select your current wireless network
Help: WhentheRSSIoftheselectedWi-Finetworkisbelow
15%,theconnectionmaybeunstable. Pleaseselectanother
available networkor decrease the distance between the
deviceandrouter.Ifyourwirelessrouterdoesnotbroadcast
its SSID, please click "Next" and manually add the wireless
network.
SSID
Wi-Fi_Burn-in
Wi-Fi_Burn-in
Wi-Fi_Burn-in
Wi-Fi_Burn-in2
RSSI
66
100
70
72
Channel
1
1
1
1
AUTH/ENCRY
WPAPSKWPA2PSK/TKIPAES
WPAPSKWPA2PSK/TKIPAES
WPAPSKWPA2PSK/TKIPAES
WPAPSKWPA2PSK/TKIPAES
Refresh
Back Next
Save success!
Add the wireless network manually
Please enter the wireless network password:
Networkname(SSID)
Encryptionmethod
Encryptionalgorithm
Password(8-63characters)
Showpsk
Note: TheSSIDandpasswordarecasesensitive.Pleasemake
sureallparametersofthewirelessnetworkmatchthoseofthe
router,includingthepassword.
Back Next
Back Complete
Wi-Fi-Test
WPA/WPA2-PSK
AES
Routerpassword
03 Manual Operation
3.1 Wi-Fi Conguration
This part shows the conguration using a web page.
Wi-Fi conguration is absolutely necessary for online monitoring and maintenance.
Preparation:
1. The inverter must be powered up with battery or grid power.
2. A router with internet access to the website www.semsportal.com is required.
1. Connect Solar-Wi-Fi* to your PC or
smart phone (* its name is the last 8
characters of the inverter's serial number);
Password:12345678.
2. Open your browser and logon to
10.10.100.253 Admin (User): admin; Password:
admin.
3. Then click "OK".
1. Click "Start Setup" to choose your router.
2. Then click "Next".
1. Fill in the password of the router, then
click "Next".
2. Click "Complete".
CancelOK
admin
Rememberthepassword(R)
admin
Admin(U
):
Password:
10.10.100.253
1

Goodwe BT Series Specifications

General

Brand	Goodwe
Model	BT Series
Category	Inverter
Language	English