Goodwe BT Series User Manual

24
User Manual V1.3-2021-12-15 03 MANUAL OPERATION
Special adjustable settings
The inverter has a eld where the user can set functions, such as trip points, trip time, time of
reconnection, active and invalid of QU curve, and PU curve. These functions can be adjusted by
using special software. If interested, please contact the after-sales department.
Note:
1. Please make sure the password, Encryption method / algorithm is the same as the router's.
2. If everything is right well, the Wi-Fi LED on inverter will change from double blink to quartic blink then
to solid status, which means Wi-Fi has connected to the server successfully.
3. WiFi conguration could also be done on PV Master App, details please check on PV Master App.
WiFi Reset & Reload
WiFi reset means restarting the WiFi module. The WiFi settings will automatically be reprocessed
and saved. WiFi Reload means setting the WiFi module to the default factory settings.
WiFi Reset
Button
WiFi reset
Short press the reset button.
The WiFi LED will blink for a few seconds.
WiFi reload
Long press the reset button more than 3s.
The WiFi indicator will double blink until
the WiFi is congured again.
Note:
The WiFi reset and reload function can be used only when:
1. WiFi disconnects with the internet or cannot connect successfully to the PV Master App.
2. "Solar-WiFi signal" cannot be found or other WiFi conguration problems exist.
Do not press the
button if WiFi
monitoring is
working correctly.
PV Master is an external monitoring and conguration application for hybrid inverters and is
used on smart phones or tablets for both Andriod and iOS systems. The main functions are
listed as below:
1. Congure the system to customize functions by the user.
2. Monitor and check the performance of the hybrid system.
3. Access and change the regional settings.
4. Check the inverter rmware version.
5. Set export power limit.
Search PV Master in Google Play or Apple App Store, or scan the QR
code to download the app.
Operation steps are the same for Android system and iOS system
although the two interfaces are slightly dierent.
For more detailed opertaion instructions, please refer to PV Master
user manual in www.goodwe.com.
PV Master App
3.2 PV Master
Note:
For Australian customers please select from Australia Region A/B/C to comply with AS/NZS 4777.2:2020.
Contact local grid operator to see which Region to select. After setting the safety region, some
parameters in the inverter system will take eect according to the corresponding safety regulations, such
as PU curve, QU curve, trip protection, etc. For Australian and European users, if you need to change the
conguration parameters, please refer to the PV Master user manual.
Wi-Fi
RESET
SYSTEM BACK-UP BATTERY GRID ENERGY COM WIFI FAULT

Goodwe BT Series Specifications

General

Brand	Goodwe
Model	BT Series
Category	Inverter
Language	English