Goodwe GW10K-ET User Manual

12
03 Product Introduction User Manual V1.1-2022-12-20
• Day time:
• When the power generated in the PV system is sucient, it will supply the loads in priority.
And the excess power will charge the batteries rst. The remaining power will be sold to
the grid.
• When the power generated in the PV system is insucient or no power is generated, the
battery will supply the loads in priority. If the battery power is insucient, then the load
will be powered by the grid.
• Night:
If the battery power is sucient, the load will be powered by the battery. If the battery power
is not enough, the load will be powered by the grid.
Self consumption mode
NOTICE
• For solar power, consider self consumption mode in priority: the excess power charges the
battery in day time; the battery supplies power to the load when there is no solar power
generated at night. This will improve the self consumption rate and saves electricity costs.
• It is suitable for areas with high electricity prices and little or no solar power generation
subsidies.

Goodwe GW10K-ET Specifications

General

Model	GW10K-ET
Max. DC Input Voltage	1000 V
Number of MPPTs	2
Rated AC Output Power	10000 W
Max. AC Output Power	11000 VA
Frequency	50 Hz / 60 Hz
Efficiency	98.3%
Dimensions	516 x 415 x 180 mm
Weight	25 kg
Max. DC Input Power	13000 W
Start Voltage	180 V
MPPT Voltage Range	200V - 1000V
Number of MPP Trackers	2
Max. Short Circuit Current per MPPT	15 A
Nominal AC Output Power	10000 W
Max. AC Apparent Power	11000 VA
Nominal AC Voltage	230 V / 400 V
Nominal Grid Frequency	50 Hz / 60 Hz
THDi	<3%
DC Switch	Yes
Protection Class	IP65
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Rated Output Power	10000 W
Grid Frequency	50 Hz / 60 Hz
Max. Efficiency	98.3%
Noise Level	<30 dB
Protection Degree	IP65
Type	Three Phase
AC Voltage Range	180V - 280V
Power Factor	0.8 leading - 0.8 lagging
Rated Grid Voltage	230 V