Goodwe GW10K-ET User Manual

72
10 Technical Parameters User Manual V1.1-2022-12-20
Technical Parameters GW5KN-ET GW6.5KN-ET GW8KN-ET GW10KN-ET
*1: For 1000V system: Maximum operating voltage is 950V.
*2: According to the local grid regulation.
*3: Can be reached only if PV and battery power is enough.
*4: For Belgium Max. Output Apparent Power(VA): GW5KN-ET is 5000; GW6.5KN-ET is 6500;
GW8KN-ET is 8000; GW10KN-ET is 10000.
*5: CAN communication is congured default. If RS485 communication is used, please replace
the corresponding communication line.
*6: No Back-up Output.
*7: Not all certications & standards listed, check the ocial website for details.

Goodwe GW10K-ET Specifications

General

Model	GW10K-ET
Max. DC Input Voltage	1000 V
Number of MPPTs	2
Rated AC Output Power	10000 W
Max. AC Output Power	11000 VA
Frequency	50 Hz / 60 Hz
Efficiency	98.3%
Dimensions	516 x 415 x 180 mm
Weight	25 kg
Max. DC Input Power	13000 W
Start Voltage	180 V
MPPT Voltage Range	200V - 1000V
Number of MPP Trackers	2
Max. Short Circuit Current per MPPT	15 A
Nominal AC Output Power	10000 W
Max. AC Apparent Power	11000 VA
Nominal AC Voltage	230 V / 400 V
Nominal Grid Frequency	50 Hz / 60 Hz
THDi	<3%
DC Switch	Yes
Protection Class	IP65
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Rated Output Power	10000 W
Grid Frequency	50 Hz / 60 Hz
Max. Efficiency	98.3%
Noise Level	<30 dB
Protection Degree	IP65
Type	Three Phase
AC Voltage Range	180V - 280V
Power Factor	0.8 leading - 0.8 lagging
Rated Grid Voltage	230 V