How to troubleshoot on-grid and backup connections in Goodwe Measuring Instruments?
To resolve on-grid and backup connection problems with Goodwe Measuring Instruments, verify that the on-grid is connected to the power grid and the backup is connected to the loads. Also, check that the polarities (e.g. L1/L2/L3/N) are correctly aligned.
What to do if Smart Meter & CT connections are not working on Goodwe Measuring Instruments?
To resolve issues with Smart Meter & CT connections in your Goodwe Measuring Instruments, ensure that the Smart Meter and CT are properly connected between the house loads and the grid. Also, make sure to follow the Smart Meter direction sign on the CT.
General| Model | GW10K-ET |
|---|---|
| Max. DC Input Voltage | 1000 V |
| Number of MPPTs | 2 |
| Rated AC Output Power | 10000 W |
| Max. AC Output Power | 11000 VA |
| Frequency | 50 Hz / 60 Hz |
| Efficiency | 98.3% |
| Dimensions | 516 x 415 x 180 mm |
| Weight | 25 kg |
| Max. DC Input Power | 13000 W |
| Start Voltage | 180 V |
| MPPT Voltage Range | 200V - 1000V |
| Number of MPP Trackers | 2 |
| Max. Short Circuit Current per MPPT | 15 A |
| Nominal AC Output Power | 10000 W |
| Max. AC Apparent Power | 11000 VA |
| Nominal AC Voltage | 230 V / 400 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| THDi | <3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural Convection |
| Rated Output Power | 10000 W |
| Grid Frequency | 50 Hz / 60 Hz |
| Max. Efficiency | 98.3% |
| Noise Level | <30 dB |
| Protection Degree | IP65 |
| Type | Three Phase |
| AC Voltage Range | 180V - 280V |
| Power Factor | 0.8 leading - 0.8 lagging |
| Rated Grid Voltage | 230 V |
Provides essential safety instructions for operating and installing the inverter.
Details specific safety measures and warnings related to the inverter unit.
Outlines crucial safety guidelines for battery handling and connection.
Details environmental, placement, and operational criteria for installation.
Step-by-step instructions for physically mounting the inverter to its location.
Critical safety warnings and precautions before making electrical connections.
Step-by-step guide for safely powering on the inverter.
Procedures for safely shutting down the inverter before maintenance.
Lists common faults, their causes, and recommended solutions.
To Next Page
