Grandstream Networks GXV3350 Administration Guide

GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 60
Use Paging Call Mode
Configures enable/disable paging call mode of the phone. If set to "Yes",
the feature of paging call will be enabled.
Enable Call-Waiting
Enables the call waiting feature. If it is not checked, the phone system will
reject the second incoming call during an active session without user’s
knowledge. But this missed call record will be saved to remind users. The
default setting is “Yes”.
Enable Call-Waiting
Tone
Sets the phone system to play the call waiting tone if there is another
incoming call. If it is set to “No”, the phone will only display the indicator on
the LCD screen for another incoming call. The default setting is “Yes”.
Enable DND Reminder
Ring
Enables the DND reminder ring. If set to "Yes", the ring splash that
indicates an incoming call when DND is enabled will be played. Default
setting is “Yes”
Enable Transfer
Enables the Transfer function. Default settings is “Yes”
Hold Call Before
Completing Transfer
When set to "Yes" the phone holds the second call before completing the
attended transfer (it sends the INVITE method to hold the call before
sending the REFER method).
Default Transfer Mode
Sets the default transfer mode for the phone system. If the Blind Transfer
or Attended Transfer mode is set, the phone system will use the specific
mode to transfer an active call. The users still have privilege to switch the
mode on the LCD screen when they tap the transfer key.
The default setting is “Blind Transfer”.
Enable transfer via non-
Transfer Programmable
Key
Programmable Key with the type speed dial, BLF and speed dial via active
account will perform as transfer programmable keys under active call. The
transfer mode during the call depends on the “Default Transfer Mode”
mentioned above. MPK can also be selected as forward/transfer
destination on the ringing screen when [Enable Function for Incoming
Call] is set to “Call Transfer”.
Enable Function for
Incoming Call
Enables the preview feature for the incoming video calls. Defines the
function for the incoming video call.
 If it is set to “Preview”, the phone system will pop up the PREVIEW
key on the LCD screen when there is an incoming video call, and
users could tap on it to check video caller without answering the
incoming video call (the call will keep playing ringback on the caller
side).
Note: By pressing the preview button, the phone will send the SIP 183
message to the caller’s camera, based on SIP RFC3261; the caller’s
camera should start sending the stream to the phone upon receiving
the SIP 183.
At any time, the GXV3350 user can press the "Answer" button. If
done, then the phone will send the SIP 200OK and call will be fully
established.

Grandstream Networks GXV3350 Specifications

General

Brand	Grandstream Networks
Model	GXV3350
Category	Telephone
Language	English