GXV3350 Administration Guide
Version 1.0.3.27
be applied as: example.com/112233aabbcc/GXV3350
Configures the user name for the config HTTP/HTTPS server.
Configures the password for the config HTTP/HTTPS server.
Always send HTTP
Basic Authentication
Information
Includes configured user name and password in HTTP request before
receiving authentication challenge from the server.
Default is “No”.
Checks if configuration files are with matching prefix before downloading
them.
This field enables user to store different configuration files in one directory
on the provisioning server.
Checks if configuration files are with matching postfix before downloading
them. This field enables user to store different configuration files in one
directory on the provisioning server.
Sets the phone system to authenticate configuration file before applying it.
When set to “Yes”, the configuration file must include value P1 with phone
system’s administration password. If it is missed or does not match the
password, the phone system will not apply it.
The default setting is “No”.
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file is using OpenSSL.
GUI Customization File
Download Mode
Selects download method: TFTP, HTTP or HTTPS.
Default setting is “HTTPS”.
GUI Customization File
URL
Sets IP address or domain name of the GUI customization file server. The
server hosts a copy of the file to be installed on the phone. The Default
setting is fm.grandstream.com/gs.
GUI Customization File
HTTP/HTTPS User Name
Enters the username for the firmware HTTP/HTTPS server.
GUI Customization File
HTTP/HTTPS Password
Enters the password for the firmware HTTP/HTTPS server.
Use Configurations of
Config File Server
Retrieve and download customization file with the configuration of the
config file.
Specifies when the firmware upgrade process will be initiated; there are 4
options:
No: The phone will only do upgrade once at boot up.