Grandstream Networks GXV3350 Administration Guide

GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 79
 Check every minute: User needs to specify “Automatic Upgrade
Check Interval(m)” and “Hour of the day (0-23)”
 Check every day: User needs to specify “Hour of the day (0-23)”.
 Check every week: User needs to specify “Hour of the day (0-23)”
and “Day of the week (0-6)”.
Note: Day of week is starting from Sunday. The default setting is “No”.
Enable Randomized
Automatic Upgrade
Configures whether the phone will upgrade automatically at random time
point within the configured period. This option is mainly used for multiple
phones upgrade at the same time.
Automatic Upgrade
Check Interval (m)
Configures how the phone system will check the server for new firmware
and configuration file downloading.
It only valid if the user selects “Check at a period of time” in the “Automatic
Upgrade”. Default setting is 10080 (namely 7 days).
Starting – Ending Hour of
the Day (0-23)
Defines at which hour of the day they phone system will check the
HTTP/HTTPS/TFTP server for firmware upgrades or configuration files
changes.
Day of the Week
Defines which day of the week the phone system will check the
HTTP/HTTPS/TFTP server for firmware upgrades or configuration files
changes.
Firmware Upgrade and
Provisioning
Defines the phone system’s rules for automatic upgrade. It can be selected
from:
 Always Check at bootup
 Always Check at bootup, when F/W pre/suffix changes,
 Skip the Firmware Check.
The default setting is “Always Check at bootup”.
Upgrade with Prompt
If set to "No", the phone will automatically start upgrading after
downloading the firmware file. Otherwise, users would need to confirm in
the prompted message on the LCD screen to start upgrading process.
The default setting is "Yes".
DHCP Option
Allow DHCP Option 43,
160 and 66 Override
Server
If set to "Yes" on the LAN side, the device will reset the CPE, upgrade,
network VLAN tag and priority configuration according to option 43 sent by
the server. At the same time, the upgrade mode and server path of the
configuration upgrade mode will be reset according to option 160 and 66
sent by the server.
If set to "Prefer, fallback when failed", the device can fallback to use the
configured provisioning server under its Firmware and Config server path
in case the server from DHCP Option fails.
DHCP Option 120
Override SIP Server
Configures the phone system to allow the DHCP offer message to override
the Config Server Path via the Option 120 header. Default setting is "Yes".

Grandstream Networks GXV3350 Specifications

General

Brand	Grandstream Networks
Model	GXV3350
Category	Telephone
Language	English