Field Description
Start Time Enter the start time for the filter
End time Enter the end time for the filter
Receivers Enter the email recipient, while searching for multiple recipients, please separate them with a comma and no spaces.
Send result Enter the status of the send result to filter with
Return code Enter the email code to filter with
Email send module Select the email module to filter from the drop-down list, which contains: All modules; User password; Alert events; CDR; T
Table 23: Email Log Filter
SNMP
GXW450x supports SNMP (Simple Network Management Protocol) which is widely used in network management for network monitoring for colle
information about monitored devices. To configure SNMP settings, go to GXW450x Web GUI→System Settings→SNMP.
Note
The SNMP page can be viewed by the Administrator level users.
To Next Page
Loading...
Need help?
General
