Grandstream Networks UCM6208 User Manual

P a g e | 99
UCM6200 Series User Manual
File Prefix
When URL is selected as firmware source, configure the firmware file prefix. If
configured, only the firmware with the matching encrypted prefix will be
downloaded and flashed into the phone, if URL is selected as firmware source.
File Postfix
When URL is selected as firmware source, configure the firmware file postfix.
If configured, only the configuration file with the matching encrypted postfix will
be downloaded and flashed into the phone.
Allow DHCP Option
43/66
If DHCP option 43 or 66 is enabled on the LAN side, the TFTP server can be
redirected.
Automatic Upgrade
If enabled, the endpoint device will automatically upgrade if a new firmware is
detected. Users can select automatic upgrading by day, by week or by minute.
• By week
Once selected, specify the day of the week to check HTTP/TFTP server
for firmware upgrades or configuration files changes.
• By day
Once selected, specify the hour of the day to check the HTTP/TFTP server
for firmware upgrades or configuration files changes.
• By minute
Once selected, specify the interval X that the SIP end device will request
for new firmware every X minutes.
Firmware Upgrade Rule
Specify how firmware upgrading and provisioning request to be sent.
Web Access
Admin Password
Configure the administrator password for admin level login.
End-User Password
Configure the end-user password for the end user level login.
Web Access Mode
Select HTTP or HTTPS as the web access protocol.
Web Server Port
Configure the port for web access. The valid range is 1 to 65535.
Security
Disable Telnet/SSH
Enable Telnet/SSH access for the SIP end device. If the SIP end device
supports Telnet access, this option controls the Telnet access of the device; if
the SIP end device supports SSH access, this option controls the SSH access
of the device.
Syslog
Syslog Server
Configure the URL/IP address for the syslog server.
Syslog Level
Select the level of logging for syslog.
Send SIP Log
Configure whether the SIP log will be included in the syslog message.

Grandstream Networks UCM6208 Specifications

General

Brand	Grandstream Networks
Model	UCM6208
Category	PBX
Language	English