Grandstream Networks UCM6208 - Table 58: Outbound RoutesPin Group; Figure 110: Create New PIN Group

P a g e | 180
UCM6200 Series User Manual
Table 58: Outbound Routes/PIN Group
Name
Specify the name of the group
Record In CDR
Specify whether to enable/disable record in CDR
PIN Number
Specify the code that will asked once dialing via a trunk
PIN Name
Specify the name of the PIN
Once user click on the following figure shows to configure the new PIN.
Figure 110: Create New PIN Group
The following screenshot shows an example of created PIN Groups and members: