Grandstream Networks UCM6208 - System CleanupReset; Reset and Reboot; Cleaner; Figure 254: Reset and Reboot

P a g e | 345
UCM6200 Series User Manual
System Cleanup/Reset
Reset and Reboot
Users could perform reset and reboot under Web GUIMaintenanceSystem Cleanup/ResetReset and
Reboot.
To factory reset the device, select the mode type first. There are two different types for reset.
• User Data
All the data including voicemail, recordings, IVR Prompt, Music on Hold, CDR and backup files will be
cleared.
• All
All the configurations and data will be reset to factory default.
Figure 254: Reset and Reboot
Cleaner
Users could configure to clean the Call Detail Report/Voice Records/Voice Mails/FAX automatically under Web
GUIMaintenanceSystem Cleanup/ResetCleaner.
The following screenshot show the settings and parameters to configure the cleaner feature on UCM6200.