Grandstream Networks UCM6208 - Wakeup Service; Wakeup Service Using Admin Login; Figure 202: Create New Wakeup Service

P a g e | 299
UCM6200 Series User Manual
WAKEUP SERVICE
The WakeUp service can be used to schedule a reminder or wake up calls to any valid destination. This service
is available on the UCM6200 as a separated module.
There are three ways to set up Wakeup Service:
• Using admin login
• Using user portal
• Using feature code
WakeUp Service using admin login
1. Login to the UCM as admin.
2. WakeUp service can be found under Web GUIValue-added FeaturesWakeup Service, click
on to create a new wakeup service. The following window will pop up.
Figure 202: Create New Wakeup Service
3. Click and to apply the changes.