Grandstream Networks UCM6208 - Figure 159: Inbound Route to Fax Extension; Figure 160: List of Fax Files

P a g e | 240
UCM6200 Series User Manual
3. Go to UCM6200 Web GUIExtension/TrunkAnalog Trunks page. Create a new analog trunk. Please
make sure "Fax Detection" is set to "No".
4. Go to UCM6200 Web GUIExtension/TrunkInbound Routes page. Create a new inbound route and
set the default destination to the Fax extension.
Figure 159: Inbound Route to Fax Extension
5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number will be
converted to PDF file and sent to the Email address fax@domain.local as attachment.
Figure 160: List of Fax Files