• If “Enable Auto Change” is selected, the recording files will be automatically saved in the available USB
Disk or SD card plugged into the UCM6200. If both USB Disk and SD card are plugged in, the recording
files will be always saved in the USB Disk.
• If “Local” is selected, the recordings will be stored in UCM6200 internal storage.
• If “USB Disk” or “SD Card” is selected, the recordings will be stored in the corresponding plugged in external
storage device. Please note the options “USB Disk” and “SD Card” will be displayed only if they are plugged
into the UCM6200.
Once “USB Disk” or “SD Card” is selected, click on “OK”. The user will be prompted to confirm to copy the
local files to the external storage device.
Figure 55: Recordings Storage Prompt Information
Click on “OK” to continue. The users will be prompted a new dialog to select the categories for the files to be
copied over.
Figure 56: Recording Storage Category
To Next Page
Loading...
Need help?
General
