Grandstream Networks UCM6208 - Table 70: PagingIntercom Group Configuration Parameters; Figure 141: PageIntercom Group Settings

P a g e | 220
UCM6200 Series User Manual
Table 70: Paging/Intercom Group Configuration Parameters
Name
Configure paging/intercom group name.
Extension
Configure the paging/intercom group extension.
Type
Select "2-way Intercom" or "1-way Page".
Custom Prompt
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on ‘Prompt’, it will direct to the page PBX SettingsVoice
PromptCustom Prompt, where users could record new prompt or upload
prompt files.
Page/Intercom Group
Members
Select available users from the left side to the paging/intercom group member
list on the right.
• Click on to edit the paging/intercom group.
• Click on to delete the paging/intercom group.
• Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the SIP
INVITE message sent to the callee in paging/intercom call.
Figure 141: Page/Intercom Group Settings
• The UCM6200 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81 and
the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUICall FeaturesFeature Codes
directly.