Grandstream Networks UCM630 Series User Manual

P a g e | 117
UCM630X Series User Manual
Version 1.0.2.25
Table 33: SIP Extension Configuration ParametersBasic Settings
General
Extension
The extension number associated with the user.
CallerID Number
Configure the CallerID Number that would be applied for outbound calls from this
user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Permission
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
to make outbound calls using this rule.
SIP/IAX Password
Configure the password for the user. A random secure password will be automatically
generated. It is recommended to use this password for security purpose.
Auth ID
Configure the authentication ID for the user. If not configured, the extension number
will be used for authentication.
Voicemail
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
 Disable Voicemail: Disable Voicemail.
 Enable Local Voicemail: Enable voicemail for the user.
 Enable Remote Voicemail: Forward the notify message from remote
voicemail system for the user, and the local voicemail will be disabled. Note:
Remote voicemail feature is used only for Infomatec (Brazil).
Voicemail
Password
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the random generated password for security purpose.
Skip Voicemail
Password
Verification
When user dials voicemail code, the password verification IVR is skipped. If enabled,
this would allow one-button voicemail access. By default, this option is disabled.
Send Voicemail to
Email
Allows users to send voicemail recording as .wav file attachment to specified email
addresses. Default setting is “No”.
Note: When set to “Default”, the global settings in Call Features  Voicemail 
Voicemail Email Settings will be used.
Keep Voicemail
after Emailing
Whether to keep the local voicemail recording after sending them. If set to “Default”,
the global settings will be used.
Note: When set to “Default”, the global settings in Call Features  Voicemail 
Voicemail Email Settings will be used.

Grandstream Networks UCM630 Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 Series
Category	Network Hardware
Language	English