Grandstream Networks UCM630 Series User Manual

P a g e | 361
UCM630X Series User Manual
Version 1.0.2.25
Table 127: Wakeup Service
Enable Wakeup Service
Enable Wakeup service.
Name
Enter a name (up to 64 characters) to identify the wakeup service.
Prompt
Select the prompt to play for that extension.
Custom Date
If disabled, users can select a specific date and time.
If enabled users can select multiple days of the week to perform the
wakeup.
Date
Select the date or dates when to performs the wakeup call.
Time
Select the time when to play the wakeup call.
Members
Select the members involved within the wakeup service group.
4. Click and to apply the changes.
A wakeup service entry is created. The UCM will send a wakeup call to every extension in the member list at
the scheduled date and time.
Note: the wakeup service has the following limitation on how many members can be added depending on UCM
model.
Table 128: Max Wakeup Members
UCM Model
Max members in a Wakeup Service
UCM6301
50
UCM6302
100
UCM6304
150
UCM6308
200
Wake Up Service from User Portal
1. Login to the user portal on the UCM630X.
2. Wake Up service can be found under “Value-added FeaturesWakeup Service”, click on ”Add” to
create a new wakeup service.
3. Configures the Name, Prompt, Date and Time for the user to make the wakeup to.
4. Click and to apply the changes.

Grandstream Networks UCM630 Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 Series
Category	Network Hardware
Language	English