P a g e | 217
UCM630X Series User Manual
Version 1.0.2.25
If this option is enabled, when a participant joins the conference room,
participant’s name will be announced to all members in the conference room.
Note:
Option “Quiet Mode” and option “Announce Caller” cannot be enabled at the same
time.
If this option is enabled, UCM630X will play Hold Music while there is only one
participant in the conference room, or the conference is not yet started.
If this option is enabled, the invitation from Web GUI via a trunk with password will
not require authentication.
Note:
Please be aware of the potential security risks when turning on this option.
Cleaner Options
Enable Conference
Schedules Cleaner
If this option is enabled, conference schedules will be automatically cleaned as
configured.
Conference
Schedules Clean
Time
Enter the clean time (in hours). The valid range is from 0 to 23.
Enter the clean interval (in days). The valid range is from 1 to 30.
Once the Conference Schedule is configured, scheduled conference will be displayed as below figure.
Figure 131: Conference Schedule