Grandstream Networks UCM630 Series User Manual

P a g e | 126
UCM630X Series User Manual
Version 1.0.2.25
Keep Voicemail
after Emailing
Only applies if extension-level or global Send Voicemail to Email is enabled.
Disable This
Extension
If selected, this extension will be disabled on the UCM630X.
Note:
The disabled extension still exists on the PBX but cannot be used on the end device.
User Settings
First Name
Configure the first name of the user. The first name can contain characters, letters,
digits and _.
Last Name
Configure the last name of the user. The last name can contain characters, letters,
digits and _.
Email Address
Fill in the Email address for the user. Voicemail will be sent to this Email address.
User Password
Configure the password for user portal access. A random numeric password is
automatically generated. It is recommended to use the randomly generated password
for security purpose.
Language
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUIPBX
SettingsVoice PromptLanguage Settings. The dropdown list shows all the
current available voice prompt languages on the UCM630X. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUIPBX SettingsVoice PromptLanguage Settings.
Mobile Phone
Number
Configure the Mobile number of the user.
Table 39: IAX Extension Configuration ParametersMedia
IAX Settings
Max Number of
Calls
Configure the maximum number of calls allowed for each remote IP address.
Require Call
Token
Configure to enable/disable requiring call token. If set to "Auto", it might lock out users
who depend on backward compatibility when peer authentication credentials are
shared between physical endpoints. The default setting is "Yes".
SRTP
Enable SRTP for the call. The default setting is disabled.
ACL Policy
Access Control List manages the IP addresses that can register to this extension.
 Allow All: Any IP address can register to this extension.
 Local Network: Only IP addresses in the configured network segments can
register to this extension.
Codec Preference
Select audio and video codec for the extension. The available codecs are: PCMU,
PCMA, GSM, AAL2-G.726-32, G,726, G.722, G.729, G.723, iLBC, ADPCM, H.264,
H.265, H.263, H.263p, RTX and VP8.

Grandstream Networks UCM630 Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 Series
Category	Network Hardware
Language	English