Grandstream Networks UCM630 Series User Manual

P a g e | 179
UCM630X Series User Manual
Version 1.0.2.25
CC Settings
Enable CC
If enabled, the system will automatically alert the user when a called party is
available, given that a previous call to that party failed for some reason.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
services for a specific device at one time.
The minimum value is 1.
Table 58: Create New IAX Trunk
Type
Select the VoIP trunk type.
 Peer IAX Trunk
 Register IAX Trunk
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured. The default setting is "No".
Username
Enter the username to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Password
Enter the password to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Disable This Trunk
If selected, the trunk will be disabled.
Caller ID
Number that the trunk will try to use when making outbound calls.
CID priority from highest to lowest is as follows:
From User (register trunk only) >>> Inbound Call CID (if Keep Original CID is
enabled and the call is originally from another trunk) >>> Trunk CID (Keep Trunk
CID enabled) >>> DOD CID >>> Extension CID >>> Register Trunk Username
(Keep Trunk CID disabled) >>> Global Outbound CID.
Note 1: Certain providers may ignore this CID.
Note 2: If this CID contains asterisk (*), call recordings from this trunk might be lost
when saving them to NAS storage.
CallerID Name
Configure the new name of the caller when the extension has no CallerID Name
configured.

Grandstream Networks UCM630 Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 Series
Category	Network Hardware
Language	English