P a g e | 288
UCM630X Series User Manual
Version 1.0.2.25
BLF AND EVENT LIST
BLF
The UCM630X supports BLF monitoring for extensions, ring group, call queue, conference room and parking
lot. For example, on the user's phone, configure the parking lot number 701 as the BLF monitored number. When
there is a parked call on 701, the LED for this BLF key will light up in red, meaning a call is parked against this
parking lot. Pressing this BLF key can pick up the call from this parking lot.
---------------------------------------------------------------------------------------------------------------------------------------------------
Note:
On the Grandstream GXP series phones, the MPK supports "Call Park" mode, which can be used to park the
call by configuring the MPK number as call park feature code (e.g., 700). MPK "Call Park" mode can also be
used to monitor and pickup parked call if the MPK number is configured as parking lot (e.g., 701).
---------------------------------------------------------------------------------------------------------------------------------------------------
Event List
Besides BLF, users can also configure the phones to monitor event list. In this way, both local extensions on the
same UCM630X and remote extensions on the VOIP trunk can be monitored. The event list setting is under Web
GUICall FeaturesEvent List.
Click on "Add" to add a new event list.
Sort selected extensions manually in the Eventlist
Click on to edit the event list configuration.
Click on to delete the event list.
Table 95: Event List Settings
Configure the name of this event list (for example, office_event_list). Please note
the URI name cannot be the same as the extension name on the UCM630X.
The valid characters are letters, digits, _ and -.
Select the available extensions/Extension Groups listed on the local UCM630X
to be monitored in the event list.
If LDAP sync is enabled between the UCM630X and the peer UCM630X, the
remote extensions will be listed under "Available Extensions". If not, manually
enter the remote extensions under "Special Extensions" field.
Manually enter the remote extensions in the peer/register trunk to be monitored
in the event list. Valid format: 5000,5001,9000