EasyManuals Logo

Grandstream Networks UCM630 Series User Manual

Grandstream Networks UCM630 Series
423 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
P a g e | 141
UCM630X Series User Manual
Version 1.0.2.25
DND Whitelist
If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple
numbers are supported and must be separated by new lines. Pattern matching is
supported.
Z match any digit from 1-9N match any digit from 2-9X match any digit from 0-9.
FWD Whitelist
Calls from users in the forward whitelist will not be forwarded. Pattern matching is
supported.
Z match any digit from 1-9N match any digit from 2-9X match any digit from 0-9.
CC Settings
Enable CC
If enabled, UCM630X will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default, it
is disabled.
CC Mode
Two modes for Call Completion are supported:
Normal: This extension is used as ordinary extension.
For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC requests
this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for this
device. In other words, this number tells how many callers may request CC services
for a specific device at one time. The minimum value is 1.
Ring Simultaneously
Ring
Simultaneously
Enable this option to have an external number ring simultaneously along with the
extension. If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.
External Number
Set the external number to be rang simultaneously. - is the connection character
which will be ignored.
This field accepts only letters, numbers, and special characters + = * #.
Time Condition for
Ring
Simultaneously
Ring the external number simultaneously along with the extension on the basis of this
time condition.
Use callee DOD on
FWD or RS
Use the DOD number when calls are being diverted/forwarded to external
destinations or when ring simultaneous is configured.

Table of Contents

Other manuals for Grandstream Networks UCM630 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks UCM630 Series and is the answer not in the manual?

Grandstream Networks UCM630 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelUCM630 Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals