Grandstream Networks UCM630 Series User Manual

P a g e | 302
UCM630X Series User Manual
Version 1.0.2.25
Barge Spy
 Default Code: *56 (“Enable Spy” needs to be checked)
 This is the feature code to join in on the call to assist both
parties.
Wakeup Service
 Default Code: *36
 Dial this code to access UCM wakeup service, you can add,
update, activate or deactivate wakeup service.
PMS Wakeup Service
 Default Code: *35
 Dial this code to access UCM PMS wakeup service, you can
add, update, activate or deactivate PMS wakeup service.
Update PMS Room Status
 Default Code: *23
 Use this code with maid code to update PMS room status.
Choose the status to set after hearing the prompt, for example:
for maid 001 dial *23001 and then 1 after hearing the prompt.
Presence Status
 Dial this code to set the presence status of the extension.
 Possible options are:
1:"unavailable"
2:"available"
3:"away"
4:"chat”
5:"dnd”
6:"userdef"
Dynamic Agent Logout
 Default Code: *85
 Use this code to logout the dynamic agent from all queues.
The UCM630X also allows user to one click enable / disable specific feature code as shown below:

Grandstream Networks UCM630 Series Specifications

General

Brand	Grandstream Networks
Model	UCM630 Series
Category	Network Hardware
Language	English