P a g e | 334
UCM630X Series User Manual
Version 1.0.2.25
API CONFIGURATION
The UCM630X supports third party billing interface API for external billing software to access CDR and call
recordings on the PBX. The API uses HTTPS to request the CDR data and call recording data matching given
parameters as configured on the third-party application.
API Configuration Parameters
Before accessing the API, the administrators need enable API and configure the access/authentication
information on the UCM630X first under Value-added FeaturesAPI Configuration. The API configuration
parameters are listed in the table below.
Table 115: Configuration Parameters (New)
Enable/Disable API. The default setting is disabled.
Configure the username for API Authentication.
Configure the password for API Authentication.
If enabled, 3
rd
party applications will be able to manage inbound calls via API
actions. acceptCall will accept incoming calls while refuseCall will reject them. If
no actions are done within 10 seconds, calls will automatically be accepted.
New API Queries Supported
The new API supports now new queries listed below which will accomplish certain requests and get DATA about
different modules on UCM630X.
Table 116: New API Supported Queries
To Next Page
Loading...
Need help?
General
