P a g e | 340
UCM630X Series User Manual
Version 1.0.2.25
ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)
The UCM630X supports Asterisk Manager Interface (AMI) with restricted access. AMI allows a client program to
connect to an Asterisk instance commands or read events over a TCP/IP stream. It is particularly useful when
the system admin tries to track the state of a telephony client inside Asterisk.
User could configure AMI parameters on UCM630X Web GUIValue-added FeaturesAMI. For details on
how to use AMI on UCM630X, please refer to the following AMI guide:
http://www.grandstream.com/sites/default/files/Resources/UCM_series_AMI_guide.pdf
---------------------------------------------------------------------------------------------------------------------------------------------------
Warning:
Please do not enable AMI on the UCM630X if it is placed on a public or untrusted network unless you have taken
steps to protect the device from unauthorized access. It is crucial to understand that AMI access can allow AMI
user to originate calls and the data exchanged via AMI is often very sensitive and private for your UCM630X
system. Please be cautious when enabling AMI access on the UCM630X and restrict the permission granted to
the AMI user. By using AMI on UCM630X you agree you understand and acknowledge the risks associated with
this.
---------------------------------------------------------------------------------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General
