P a g e | 60
UCM630X Series User Manual
Version 1.0.2.25
Security Settings
The UCM630X provides users firewall security configurations to prevent certain malicious attack to the
UCM630X system. Users could configure to allow, restrict, or reject specific traffic through the device for security
and bandwidth purpose. The UCM630X also provides Fail2ban feature for authentication errors in SIP
REGISTER, INVITE and SUBSCRIBE. To configure firewall settings in the UCM630X, go to Web GUISystem
SettingsSecurity Settings page.
Static Defense
Under Web GUISystem SettingsSecurity SettingsStatic Defense page, users will see the following
information:
Current service information with port, process, and type.
Typical firewall settings.
Custom firewall settings.
The following table shows a sample current service status running on the UCM630X.
Table 12: UCM630X FirewallStatic DefenseCurrent Service
UCM630X zero_config service
To Next Page
Loading...
Need help?
General
