P a g e | 350
UCM630X Series User Manual
Version 1.0.2.25
PMS INTEGRATION
UCM630X supports Hotel Property Management System PMS, including check-in/check-out services, wakeup
calls, room status, Do Not Disturb which provide an ease of management for hotel applications. This feature can
be found on Web GUIValue-added FeaturesPMS.
Note: The PMS integration on UCM is currently supported only with one of the three following solutions.
The PMS module built-in the UCM supports the following features based on each solution:
Table 122: PMS Supported Features
Unconditional Call Forward
HMobile PMS Connector
In this mode, the system can be divided into three parts:
PMS (Property Management System)
PMSI (Property Management System Interface)
PBX
Grandstream UCM6XXX series have integrated HMobile Connect PMSI which supports a large variety of PMS
software providing following hospitality features: Check-in, Check-out, set Room Status, Wake-up call and more.
The following figure illustrates the communication flow between the PBX (Grandstream UCM6xxx Series) and
PMS software, which is done through a middleware system (HMobile Connect) acting as interface between both
parties.