GRAPHTEC CE5000-40CRP - 2. PARTS NAMES and FUNCTIONS; 2.1 Parts Names and Functions

CE5000-UM-251-9370 2-1
2. PARTS NAMES and FUNCTIONS
2. PARTS NAMES and FUNCTIONS
2.1 Parts Names and Functions
Front View
Media set lever
Pen holder
Pen carriage
Grit roller
Cutting mat
Push rollers
The ab
ove illustration is of the CE5000-120 model.
USB inter
face
connector
Se
rial (RS-232C)
interface connector
Control panel
Cutting mat : Cutting or plotting is performed on this mat.
Grit roller : Feeds the medium backward or forward
Push rollers : Push the medium against the grit roller
Pen carriage : Moves the cutter pen to the left and right
Pen holder : Holds the cutter pen and moves it up and down
Media set lever : Raises or lowers the push rollers during loading of a
medium
Control panel : Used to operate the cutting plotter and set functions
USB interface connector : Used to connect a USB cable
Serial (RS-232C) interface connector : Used to connect an RS-232C serial interface cable