GRAPHTEC CE5000-40CRP - 6.2 Mechanical Parts

CE5000-UM-251-9370 6-10
6. DISASSEMBLY AND REASSEMBLY
6.2 Mechanical Parts
6.2.1 How to Replace the Front and Rear Media Sensors
How to detach the front or rear media sensor
(1) Detach the front or rear guide (Front guide: see Subsection 6.1.5 for CE5000-40 and 60, and
Subsection 6.1.6 for CE5000-120/120AP; Rear guide: see Subsection 6.1.7).
(2) Remove the M3L12 binding head screw attaching the sensor.
(3) Disconnect the sensor from the connector.
M3L12
binding head
screw
Front media sensor
Rear media sensor
How to reinstall the front media sensor
(1) Connect the sensor to the connector.
(2) Fasten the M3L12 binding head screw to mount the sensor.
(3) Install the front guide.
How to reinstall the rear media sensor
(1) Connect the sensor to the connector.
(2) Fasten the M3L12 binding head screw to mount the sensor.
(3) Install the rear guide.