GRAPHTEC CE5000-40CRP - How to Replace the Push Roller

CE5000-UM-251-9370 6-11
6. DISASSEMBLY AND REASSEMBLY
6.2.2 How to Replace the Push Roller
How to detach the push roller
(1) Detach the right side of the E-ring from the push roller shaft.
Push roller
E-ring
Push roller shaft
Push roller arm
(2) Detach the push roller shaft from the push roller arm from the left side.
(3) Detach the push roller.
How to reinstall the push roller
(1) Reattach the push roller in the reverse order in which it was detached.