CE5000-UM-251-9370 7-9
7. ELECTRICAL ADJUSTMENTS
7.8 Setting the Auto-Registration Mark Sensor Option
If you have the auto-registration mark sensor option, you must set the MARK OPTION mode to ON.
How to set the auto-registration mark sensor option
(1) Turn on the power while pressing the TEST and ENTER keys.
(2) Select the media mode.
(3) Press the PAUSE key to display the menu shown below.
MODEL SELECT
(4) Press the NEXT key until the following menu is displayed.
MARK OPTION
(5) Press the ENTER key to display the menu shown below.
MARK OPTION OFF
(6) Press the UP or DOWN ARROW key to change this setting to ON.
(7) Press the ENTER key to store the setting. This completes the setting.
To Next Page
Loading...
