GRAPHTEC CE5000-40CRP - How to Replace the Front Guide (CE5000-120;120 AP)

CE5000-UM-251-9370 6-5
6. DISASSEMBLY AND REASSEMBLY
6.1.6 How to Replace the Front Guide (CE5000-120/120AP)
There are two measuring tapes on the front guide of the CE5000-120. You have to attach new tapes after
replacing the front guide.
How to detach the front guide (CE5000-120/120AP)
(1) Remove the three M3L6 TP head screws from front guide 120.
(2) Pull out the front guide to the front.
M3L6 TP
head screw
The top of the front guide is hooked onto these holders.
Front guide notch
Front guide